Digital Display Dosing Peristaltic Pump

BT100FJ

Flowrate

0.17-290ml/min

Application

Spray coating dispensing
Adhesives for cement
Dispensing the cell culture medium
e liquid filling 
liquid drug dispensing 
nail polish distribution
Filtration of cell culture fluid.

Note

Pump head : YZ2515x Max speed: 100rpm

Digital Display Dosing Peristaltic Pump  -  BT100FJ

1. This product can be installed by YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, digital rotary knob, easy to operate, 
4. FULL SPEED button available for filling in & emptying out the tubing.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.


Technical Parameter:

Model: BT100FJ


Flow rate: 0.0015-380ml/min


Display mode: 4-digital LED display current rotating speed and dispensing frequency


Speed Control Method: Digital rotary knob to adjust the speed


​​​​Power consumption: <22W


Dispensing number: 0~9999t


Dispensing time: 0.1s~9999min


Interval time: 0.1s~9999min


Back Suction angle: 10°~720° (1° Stepping)


Speed: 0.1-100rpm


Speed resolution: 0.1rpm


Flow accuracy: ≤±0.5%


Power supply: AC220V±10%(standard) or AC110V ±10%(optional)


External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol


Work Environment: Temperature  0-40℃, <80% relative humidity, no condensation


​​​​​IP rating: IP31 



Dimension Drawing:
234*154*144(mm)


Operation Panel:

​​


Video:

 

 

Pump head:

YZ1515x

YZ2515x

DG series


Silicone tube parameter:

BT100FJ/YZ1515x(0.007-380ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
13# 0.8 1.6 4 0.1-100 0.007-7
14#​​​​ 1.6 1.6 4.8 0.1-100 0.027-27
19# 2.4 1.6 5.6 0.1-100 0.051-51
16# 3.1 1.6 6.3 0.1-100 0.082-82
25#  4.8 1.6 8 0.1-100 0.17-170
17# 6.4 1.6 9.6 0.1-100 0.29-290
18# 7.9 1.6 11.1 0.1-100 0.38-380

BT100FJ/YZ2515x(0.17-290ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
15# 4.8 2.4 9.6 0.1-100 0.17-710
24#​​​​ 6.4 2.4 11.2 0.1-100 0.29-290

DG1-12/6 rollers(0.002-36.6ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
0.5*0.8 0.5 0.8 2.4 0.1-100 0.002-2
1*1​​​​ 1 1 3 0.1-100 0.006-6
2*1 2 1 4 0.1-100 0.019-19
2.4*0.8 2.4 0.8 4 0.1-100 0.0245-24.5
3*1  3 1 5 0.1-100 0.0366-36.6

DG1-12/10 rollers(0.0015-17.8ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
0.5*0.8 0.5 0.8 2.4 0.1-100 0.0015-1.5
1*1​​​​ 1 1 3 0.1-100 0.004-4
2*1 2 1 4 0.1-100 0.013-13
2.4*0.8 2.4 0.8 4 0.1-100 0.0178-17.8
3*1  3 1 5 0.1-100 0.0178-17.8

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:
4-led display

​​​​​​1. Memory function available in case of power off and it will continue the work once the power was restarted.

2. Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control.

3. Good cost performance.

Control

​​​​​​1. Two ways of changing flow speeds: by hand through switching knobs/ automatic control through external controller interface

2. Switching knobs excel membrane keypad in reducing failure rates during the operation

3. FULL SPEED button available for filling in & emptying out

4. Memory function available in case of power off

5. Good capability price rate.

6. Not suitable when used in the open air.

Application:

1. Circulation of cell suspension in fermentation

2. Nutrient supply for cultures 

3. Sterilised media dispensing

4. Ultra filtration

5. Circuit board manufacturing

6. Vitamin A & D injection

7. Metal surface treatment and coating process

8. Mining flotation

​​​​9. Solution liquid,oil ink,adhesive transmission

  CR Alibaba      CR AliExpress   

All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd
Address:2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China

Skype: ella-crpump QQ: 507183200
TOP