Customer demand
A large chemical company needs a batch of pumps to transfer liquid through a constant current:
1) The liquid has particulate impurities and is light and viscous.
2) The flow rate is about 8L in one minute, and it is bigger and better.
3) The cost control is strict, easy to move, easy to install, and requires long service life.
4) The head requirement is about 8 meters. With 220V AC, the accuracy requirement is not very high.
Solution
1) The user's liquid has impurities, and it is necessary to use industrial peristaltic pump series products. The thick wall thickness of the hose is more conducive to the delivery of liquid.
2) Use our OEM200/YZ35-13L peristaltic pump to meet customer flow requirements up to 10L/min.
3) The installation volume of the product is smaller than that of the whole machine, and it is more suitable for nesting into the customer's equipment.
4) The pump head adopts PPS+304 stainless steel roller, which has superior corrosion resistance and the longest service life in the same series, and the pressure can be adjusted
Generate value
1) Peristaltic pump material is super corrosion resistant and can transport most chemical raw materials, corrosive and aggressive liquids.
2) High-power AC gear motor + YZ35-13L product, with the perfect combination of code speed box, is the most cost-effective product in high-flow products.
3) The pump head adopts PPS material + 304 stainless steel roller for long service life.
4) The pressure can be adjusted and the lift can be up to 15 meters.
5) Flow rate and accuracy: The flow rate is 0-10000ml/min, the adjustable transmission accuracy can reach 1-2%
6) The hose is used to transport the liquid, and the raw liquid does not need to pass through the pump body, so the user does not have to worry about the pump body being clogged or difficult to clean.
7) This product can be equipped with a stepper or servo motor, which can be used with the customer's central control system equipment.
The Advantage of Chonry Peristaltic Pump
- Peristaltic pumps are easy to maintain
- Replaceable tubes allow you to switch from one liquid to another in the shortest amount of time.
- No need to rinse and disassemble after the flushable product, you only need to replace the peristaltic pump tubing
- Chonry Peristaltic pump with high precision
The calibration function can ensure the filling accuracy for each dose. The suck back function prevents liquid (reverse): in the dispense mode, after the end of the direct cycle, the return stroke is initiated to prevent the liquid from flowing out of the pump tube during the stop.
- Peristaltic pumps are non-pollution: the fluid only contacts the pump tube and does not touch the pump body;
- Peristaltic pump is Versatility
- Peristaltic pumps can be used with a variety of products and can be used in a variety of industries.
- Peristaltic pumps are easy to work
After the power is turned off and on, the control system maintains the current settings (pump head tubing model and other parameters).
- Peristaltic pump with good sealing: It has good self-priming ability and can be idling to prevent backflow.
- Peristaltic pump with Low shear: ideal for conveying shear-sensitive, aggressive fluids.
